In general, developing this understanding comes from education and experience.  When looking at a water treatment supplier make sure of the following: 

• the people in the company developing the products that will be used in your system have the education needed to formulate products that will be effective and will not harm your system
• the company has sufficient experience to properly care for your system(s)
• the individual doing the on-site work has the know-how caring for your system requires

Looking into these three areas, will save you frustration and loss of capital equipment in the long run.

Enerco's Product Development

At Enerco, our products are developed by degreed chemists.  Each member of our product development team has worked developing formulations for water treatment for at least 5 years.  The senior member has 25+ years experience.

Before any new product ships out the door to our valued customers, it undergoes extensive testing.  Not only is it tested to assure effectiveness and to be certain no system damage will occur, it is stability tested.

Enerco's Experience

When Enerco was founded in 1977, the philosophy of the company was the same as it is today.  Provide you with superior products that will reduce the overall cost of your operation by maintaining and increasing system efficiency and longevity.

In the beginning we focused on water treatment products.  Today, this translated to 26 years of experience in treating systems like yours.

Enerco's Professionals

Additionally, the sales and service representatives... the members of the Enerco team our customers know the best... are fully trained professionals.

Many joined Enerco with water treatment experience from their previous employment.  Others became members of our team with none.  In all cases, extensive training is given on proper usage and testing for Enerco products.  General water treatment courses are taken when necessary.  On-going training is a must.

This ensures the people at Enerco that you interact with the most - our field staff - will be knowledgeable.

In cases where needed, you can also rely on our fully-staffed technical support department.  Not only do they have access to the information gathered by Enerco for the last 26 years, they all have field experience.  There is a degreed chemist and a microbiologist as part of the staff.

Your Advantage

All these add up to the superior value you get when you use Enerco's products for your water treatment needs.  Effective products, safe for your system, backed by unparalleled technical support and customer service.

Types of Systems Treated

Often this question is asked:  Do you treat ________(fill in type of system)?

The answer is YES!  Here's a list of some of the types of systems current customers have.

• Industrial Process Steam Boilers

• Heating Steam Boilers

• Induced Draft Cooling Towers

• Forced Air Cooling Towers

• Closed Circuit Fluid Coolers

• Hot Closed Loops - Process and Heating

• Floor Heating Loops

• Chilled Closed Loops - Process and Cooling

• Glycol Heat Transfer Loops

• Heat Pump Loops

• Semi-Open Loops - Process

• Semi-Closed Loops - Process

• Snow-Melt Systems

• Food Process Steam Boilers

• Building Potable Water Supply

• Humidification Steamers

•  

•  

How To Get Started

The actual chemistry used to treat systems is site specific.  Your system is no different.  To properly recommend products and control ranges requires an on-site survey (offered at no-charge to you).  Often, water sample(s) will have to be analyzed in our lab (again at no-charge to you). 

Then after your system is thoroughly understood, your sales and service representative will propose specific products to use in your facility.  This will all be done at no-charge and with no-obligation on your part to purchase/use Enerco products.

All you need do to get the process started is let us know you're interested.